Are you having trouble with your electric stove burner staying on high? You’re not alone. Many people find their electric stove burner staying on high for no apparent reason.
In this article, we’ll explore what could be causing your stove burner to stay on high and the best ways to troubleshoot and repair it. We’ll also look at the different replacement options available to you.
Let’s get started and find out why your electric stove burner is staying on high.
Why Electric Stove Burner Stays on High (Possible Causes)
You may be asking yourself why your electric stove burner stays on high.
The answer may be a malfunctioning burner control switch, a stuck bimetallic strip, a failed distance adjustment mechanism, or improper electricity cycling.
All three potential causes can cause an electric stove burner to stay high and should be investigated to determine the exact cause.
Malfunctioning Burner Control Switch
The malfunctioning burner control switch may be why your electric stove burner stays on high. To test it, you’ll need to use a multimeter to check the switch’s continuity. Here’s what you’ll need to do:
- Unplug the stove
- Remove the burner switch
- Test the switch terminals
If the multimeter shows no continuity, the switch is likely the cause. Replacing it should fix the issue. Be sure to use an exact replacement of the original switch for the best results.
- Replace the switch
- Install the new switch
- Reattach the wires
Stuck Bimetallic Strip or Failed Distance Adjustment Mechanism
If the bimetallic strip is stuck or the distance adjustment mechanism isn’t working properly, that could be why your stovetop’s temperature won’t adjust. The bimetallic strip is a component of the infinite switch, which controls the burner element. If stuck in the closed position, the burner will remain on high. Similarly, if the distance adjustment mechanism fails, the burner will stay on high.
To fix this, check the wiring, as it may be loose. If that doesn’t help, the infinite switch or the burner element may need to be replaced.
Improper Cycling of Electricity
If your stovetop’s temperature doesn’t adjust, it could be due to improper electricity cycling. This occurs when the flow of electricity is not cycling correctly, which can cause the burner to remain on high.
Troubleshooting the problem can be tricky and may require professional assistance. If the burner or infinite switch is faulty, it may need replacing. If you’re uncomfortable doing this yourself, getting professional help is best. Otherwise, you may spend more time and money fixing the problem.
Remember, if you need help with electricity cycling, feel free to seek professional assistance.
How to Troubleshoot an Electric Stove Burner that Stays High?
If you have an electric stove burner that stays on high, you should turn off the stove and unplug it from the power source.
Check the burner control switch for signs of damage or wear, and test the infinite switch with an ohmmeter.
Additionally, you should inspect the bimetallic strip and distance adjustment mechanism and clean the burner and the socket it plugs into.
Turn Off the Stove and Unplug It from The Power Source
You need to turn off the stove and unplug it from the power source before you can troubleshoot any issue. This important safety step protects you from any potential electrical accidents. Failure to do so could result in a serious safety hazard.
Unplug the electric stove from its power source and then turn it off. This will ensure that no power flows to the stove and the loose connection can be safely inspected. You may need to check the wiring to ensure it is properly connected.
By following this step, you can safely and effectively troubleshoot the issue without running the risk of any electrical accidents.
Check the Burner Control Switch for Signs of Damage or Wear
The burner control switch should be checked for signs of damage or wear. It’s important to check that the switch is properly working, as any damage could cause the stove to stay on high. To check, look for signs of heat resistance, discoloration, cracked or broken parts, loose connections in the receptacle, and unusual odors or smoke from the switch.
If any of these signs are present, replace the switch immediately. If not, the switch is likely functioning properly, and other issues may be causing the stove to stay on high.
Test the Infinite Switch with An Ohmmeter
Testing the infinite switch with an ohmmeter can help determine if it’s functioning properly. To do this, connect the ohmmeter to the two terminals of the burner switch. The switch works if the ohmmeter reads a certain resistance range.
If the resistance is outside the expected range, the switch may be defective and need to be replaced.
If the thermostat is defective, the burner will stay high regardless of the switch’s condition. To repair this issue, replace the defective thermostat.
Remember to unplug the stove from the power source before attempting any repairs.
Check the Bimetallic Strip and Distance Adjustment Mechanism
Checking the bimetallic strip and distance adjustment mechanism can help determine if the infinite switch functions properly. It’s important to ensure the burner switch is properly maintained and cleaned.
If the bimetallic strip is stuck in the closed position or the distance adjustment mechanism is not working, it can cause the burner to stay on high. To check the bimetallic strip, use an ohmmeter to measure the resistance.
To check the distance adjustment mechanism, ensure the distance between the two contacts is set correctly. If any of these components are not functioning properly, the infinite switch must be replaced.
Taking the time to properly inspect and maintain the bimetallic strip and distance adjustment mechanism can help ensure the burner switch is in proper working order.
Clean the Burner and The Socket It Plugs Into
Clean the socket and burner regularly to make sure everything is functioning properly. The terminals of the burner should be wiped down with a damp cloth to remove any dirt or debris and the burner receptacle. This will help ensure a good connection between the burner and the socket and prevent any issues.
Also, clean any dirt or dust from the burner, as this can affect the connection. Taking the time to clean the burner and the socket can help prevent problems and ensure the burner is functioning correctly.
Cleaning the burner and socket is important to maintaining a safe and efficient electric stove.
Check the wiring and connections.
To ensure electrical issues don’t arise, inspect the wiring and connections to ensure they’re secure and in good shape. Look for loose connections, a faulty burner switch, corroded wiring, and damaged insulation.
Regularly inspecting your wiring and connections is a great way to prevent any potential nuisance. Ensure the burner switch works properly and the wiring isn’t corroded or damaged. Examine the insulation, too, as it can be a sign of trouble.
If you find any issues, be sure to have them fixed right away. Don’t let faulty wiring cause problems, and keep your electric stove running smoothly.
Repair and Replacement Options
If your electric stove burner is stuck on high, your first step should be to replace the burner control switch.
If that does not solve the issue, you may need to replace the infinite switch.
If you’re uncomfortable doing this, call a professional repair service.
Replace the Burner Control Switch.
You’ll need to replace the burner control switch if it’s faulty or damaged, as it regulates the flow of electricity to the burner. It’s the only way to ensure the burner won’t stay high.
Replacing the switch is a simple process and can be done with a few tools. First, you’ll need to turn off the power to the stove. Then, remove the screws that hold the switch in place and carefully take out the switch. Install the new switch, connect it properly, and reinstall the screws.
Finally, turn the power back on and test the stove. If the burner stays high, you must check the wiring for potential issues. By replacing the faulty switch, you’ll be able to restore the normal functioning of your electric stove.
Replace the Infinite Switch.
Replacing the infinite switch is the only way to ensure the burner won’t stay on too high. The switch controls the power supply to the burner, so a faulty one can cause it to stay on high.
First, turn off the power supply to the burner to replace the infinite switch. Then, remove the old switch from the wiring and install the new switch. Make sure the new switch is correctly connected to the wiring.
Finally, turn the power back on and test the burner to ensure it works properly. Replacing the infinite switch is easy with the right tools and knowledge. You can fix your electric stove burner with patience and care and ensure it doesn’t stay on high.
Call a Professional Repair Service
Calling a professional repair service is best if you need more confidence in diagnosing and repairing the issue yourself. They have the expertise and tools to identify the root cause of the problem and fix it quickly and correctly. The benefits of calling a professional repair service include:
- The assurance that the repair will be done correctly.
- Peace of mind knowing that an experienced professional is handling the issue.
- The convenience of having the repair performed quickly and efficiently.
When you call a professional repair service, you can trust that the job will be done correctly and with the utmost care. They will be able to diagnose the issue quickly and develop a plan of action to get the stove burner back to working at its maximum efficiency.
You’ve determined why your electric stove burner stays on high, and you’ve also learned how to troubleshoot, repair, and replace it.
Now that you know what to do, you can confidently address the issue and get your electric stove burner functioning properly again.
Remember to turn off the power to the stove before starting any repairs or replacements.
With a few simple steps, you can have your electric stove burner working as it should in no time.